|
The Avaya 105A Music On Hold Coupler is for connecting a Music On Hold device to the Partner Communications System so that callers on hold can listen to recorded music.
|
|
|
The Partner 200 Module adds 2 incoming lines to your Partner, Partner II and Partner Plus phone system.
|
|
|
|
The Partner 200E Module adds 2 more lines to the Partner telephone system. The Partner 200E Module is compatible with all Partner, Partner Plus, Partner II and Partner ACS phone systems.
|
|
|
The Partner 206 Release 2.0 adds 2 lines and 6 extensions. The Partner 206 R2.0 can be used as a stand-alone control unit for the Partner system or as an expansion module for the Partner, Partner Plus, Partner II, or Partner ACS phone systems. |
|
|
|
The Partner 206 Release 3.0 adds 2 lines and 6 extensions. The Partner 206 R3.0 can be used as a stand-alone control unit for the Partner system or as an expansion module for the Partner, Partner Plus, Partner II, or Partner ACS phone systems. |
|
|
|
The Partner 206 Release 4.0 adds 2 lines and 6 extensions. The Partner 206 R4.0 can be used as a stand-alone control unit for the Partner system or as an expansion module for the Partner, Partner Plus, Partner II, or Partner ACS phone systems. |
|
|
|
The Partner 206 Release 4.1 adds 2 lines and 6 extensions. The Partner 206 R4.1 can be used as a stand-alone control unit for the Partner system or as an expansion module for the Partner, Partner Plus, Partner II, or Partner ACS phone systems. |
|
|
|
Use the Partner 206E Release 3.0 module to add 2 lines and 6 extensions to your Partner phone system. Extension ports on the Partner 206E R3.0 are designed for either Partner multi-line telephones or single line devices such as modems or fax machines. |
|
|
|
Use the Partner 206E Release 3.1 module to add 2 lines and 6 extensions to your Partner phone system. Extension ports on the Partner 206E R3.1 are designed for either Partner multi-line telephones or single line devices such as modems or fax machines. |
|
|
|
Use the Partner 206E Release 4.1 module to add 2 lines and 6 extensions to your Partner phone system. Extension ports on the Partner 206E R4.1 are designed for either Partner multi-line telephones or single line devices such as modems or fax machines. |
|
|
|
The Partner 206EC is the same as the 206E module but it adds Caller ID information on Partner display telephones. The Partner 206EC adds 2 incoming lines and 6 telephone station ports with Caller ID. |
|
|
The Partner 400E Module adds 4 more lines to your Partner ACS phone system. The Partner 400E does not add any extensions to you system. |
|
|
|
The Partner 400EC Module adds 4 more telephone lines and Caller ID to your system. The Partner 400EC is compatible with Partner II Release 3.0 or greater and all Partner ACS Releases.
|
|
|
The Partner 012E ETR Module adds 12 more telephones to your Partner ACS phone system. This module does not have any lines.
|
|
|
The Avaya Partner 308EC Expansion Module adds 3 lines and 8 telephone sets for the Partner ACS R3.0 system and higher. The Partner ACS 308EC features Caller ID built-in (Caller ID must be provided by local carrier). |
|
|
The Partner Endeavor 362EC provides 3 loop start line ports. Six extension ports on the 362EC supports Partner Endeavor or Partner telephone sets.
|
|
|
PARTNER Endeavor Processor Module provides the software intelligence that controls the system features. Processor Module Specifications, 68306 16 Mhz processor,256Kbyte RAM, 512Kbyte FLASH ROM.
|
|
